The Internet's Largest and Fastest Growing Engraving Community
Discuss hand engraving using basic to the most advanced methods and equipment
Forum Members: 14,761. Welcome to our newest member, AnicaLin
EngravingForum.com -
Domain since Feb 7, 2003
Graver Video Conferencing is empty Join now!
|
ENGRAVING TOOLS - Paypal accepted | Classes | Glossary | Feedback | Tips | Sharpening | Bulino | Videos | Forum Policies |
|
Thread Tools |
#1
|
||||
|
||||
Engraving Videos ~ 11 hours worth
NOTE: This page takes a while to load since there are so many videos. Wait for it.
I hope this will work. Here are all of videos in sequence order that I had made of the SR Johnson pearl handle fighter. Approx 11 hours of videos. I found two more tapes that may have more on them. I'm pretty sure I had recordered some of the gold inlay process but they aren't in any of these. I hope it is on one of the extra found tapes. My video8 player died though and I'll need to find another to see what is on the other tapes. Here is a completed picture of the project. ______________________________________________ Initial outline cutting ______________________________________________ Recutting ______________________________________________ Recutting and removing background ______________________________________________ Shading with some gold shading ______________________________________________ Shading Pins ______________________________________________ Shading Gold ______________________________________________ Completing and signing
__________________
__________________________________ Steve Lindsay AirGraver.com EngravingArtist.com |
#2
|
||||
|
||||
Re: Videos ~ 11 hours
These are the videos that go with the Cut a practice plate together online thread. Engraving is with the PalmControl.
There are 13 of them.
__________________
__________________________________ Steve Lindsay AirGraver.com EngravingArtist.com |
#3
|
||||
|
||||
Re: Videos ~ 11 hours
Hi Steve, it is very interresting, do you have the video when you make the gold inlay?
__________________
http://rbaptiste.com |
#4
|
||||
|
||||
Re: Videos ~ 11 hours
Many Thanks Steve.
This is just what us newbies need. I know I will spend a lot of time reviewing the videos time an again, until it soaks in, as will others I am sure. Carl
__________________
Carl Wallace Life Member NRA FEGA Member |
#5
|
|||
|
|||
Re: Videos ~ 11 hours
This is great stuff. Thanks a million for all the work you do. The only thing is; I can't hear it. I've got the volume cranked up to maximum and can barely make out a word. Is this just my computer or has anyone else had it happen?
|
#6
|
||||
|
||||
Re: Videos ~ 11 hours
I haven't checked this set (can't see them through the Firewall Of Idiocy at work) but if you're hearing the graver purr then the volume's probably ok.
From what I've seen Steve doesn't talk to himself that much when he engraves. |
#7
|
||||
|
||||
Re: Videos ~ 11 hours
Roland, I found two more tapes that may have more of the knife engraving on them. I'm pretty sure I had recordered some of the gold inlay process but they aren't in any of the above videos. I hope it is on one of the extra found tapes. My video8 player died though and I'll need to find another to see what is on the other tapes.
Greyback, In a few of what I labeled "initial outline cutting" I spoke a little. See if you can use that to adjust the volume. Also where I was using the rotary tool in the background removing videos.. see if you can hear and adjust the volume there. My older desktop computer doesn't put the sound volume out as well as my laptop. I can hear the finer shading videos better with the laptop.
__________________
__________________________________ Steve Lindsay AirGraver.com EngravingArtist.com |
#8
|
|||
|
|||
Re: Videos ~ 11 hours
Steve,
This could be the best organized show and tell engraving video reference on the internet! Thank you for taking the time to post it in such a convenient manner. Of course the project design and execution are exquisite! best Rod |
#9
|
||||
|
||||
Re: Videos ~ 11 hours
Thanks Rod, I hope it does help. There are more videos I've been meaning to upload too. One is of Gene Clark's watches. Now that there is a way to organize them it should make it easier.
__________________
__________________________________ Steve Lindsay AirGraver.com EngravingArtist.com |
#10
|
|||
|
|||
Re: Videos ~ 11 hours worth
Well Gang,
Here I am in Cottonwood AZ, taking classes (Engraving - 2nd Semester- Ms. Rachel Wells) at CETEC - Yavapai College, Prescot Valley AZ. This is a long drive for me - three time per week and trying to hold a job. If I may say - I find the forum / cafe fantastic. In the last few days I have learned more thru this site the I have for a while. During the time that I am in it, I will try to participate as much as possible. God Bless, Stan |
#11
|
|||
|
|||
Re: Videos ~ 11 hours worth
Hi Stanley,
Glad to see you decided to enjoying this great forum and all the great information it has. Welcome. Don't forget to let your classmates know of this forum and let them know they are also welcome to join. AirAmp |
#12
|
|||
|
|||
Re: Videos ~ 11 hours worth
Steve
I just finished viewing the, Initial cutting of the SRJ knife videos. It is so great to be able listen to your thoughts and comments as you are cutting. This another complete and helpful diminution. Thanks very much. Ken |
#13
|
|||
|
|||
Re: Videos ~ 11 hours worth
Hello Fellow Engravers
I am a new Engraver. I am 67 and have been in the hospital 4 times since halloween. Ha Might be the shortest engraver in history. Ha. Anyway I am much closer to buying a Push Engraver from Steve. I know it has to be the best Engraving invention of the era and Steves Website, schools, His Help sites He is giving to Us for free who are not artists but merely mechanics deserves to be the Humanitarian award of the century to us. Thank You Steve for all of the help you have given to Me and many others just like me who thought you had to be an artist to do great engraving. I live in Fairland, Indiana and would be glad to help anyone who would like to come to my house to see basic engraving to get you started. Yu cannot do it without tools but you can do it with cheap tools. I will show you how I did it. Sincerely Charlie |
#14
|
|||
|
|||
Re: Videos ~ 11 hours worth
Steve,
What a wonderful tutorial! Thank you so much for sharing your beautiful work and guiding in my "learning" process. You are truely a Master and an inspiration. Debi R. |
#15
|
|||
|
|||
Re: Videos ~ 11 hours worth
Steve,
I'm curious about how the gold inlay is done. I have done silver inlay one time on a spider front site on a flintlock shotgun. This was done by undercutting the edges of the inlet and hammering the slightly thicker silver site into the inlet, locking it in. I'm wondering how your method differs, since it would seem that recutting the design as you do, following the seam of the two metals would destroy the joint and release the inlay, if done by the method I used. I'd love to see the video of the inlay process, if you find it. Thanks, Jeff |
#16
|
||||
|
||||
Re: Videos ~ 11 hours worth
Thank you for the nice comments everyone on the videos. There are still those watch video's that I've been meaning to upload and add to these.
Hi Jeff, The gold inlay pockets are cut away using the airdrill similar to the way I am cutting background out in these videos. After the pocket is made I undercut with a reshaped dental bur. It is like the smaller one I use in the videos but ground slightly smaller. I have described the process in the "cut a practice plate together" thread. http://www.engravingforum.com/showthread.php?p=6877 Another way to undercut is how Raland Baptiste does it. We made a template for his undercut chisel. http://www.engravingforum.com/showthread.php?t=2312 Of course a third way to undercut is with a graver. For staight line borders and such this is almost faster. For me it is tougher going around inside corners though. Make a knife edge shaped graver and place a tiny flat heel on for this. It basiclly makes a tiny flat. Here is a pic of that point... http://www.handgravers.com/images/graver-flat.jpg Still another way that can work for small inlay lines that are tough to get in to undercut is to use the same point in the above picture and jab in hooks at the bottom of the line. Be careful the hooks don't raise above the surface or you'll see white dots in the gold line after sanding flush.
__________________
__________________________________ Steve Lindsay AirGraver.com EngravingArtist.com |
#17
|
|||
|
|||
Re: Videos ~ 11 hours worth
Steve,
Thanks for the very detailed reply. The key bit of info that had me puzzled was solved by your diagram showing the thickness of the gold, and that it is anchored below the depth of the engraving cuts. Thanks Jeff |
#18
|
||||
|
||||
Re: Videos ~ 11 hours Going to the well...
Quote:
I think this is unquestionably the best resource on the web for seeing and learning engraving. I hope you leave this prominently available for a long time as it continues to illuminate. Regards, Jim |
#19
|
|||
|
|||
Re: Videos ~ 11 hours worth
Hi Steve,
The videos are very interesting.A lot of work for you but a delight for me hence, thanks a lot. I would like to know which gravers did you use for initial cutting and recutting? Regards Mohd |
#20
|
||||
|
||||
Re: Videos ~ 11 hours worth
Thanks for the nice comments everyone.
Hi Mohd, I used a universal template width graver (116 degrees) for initial cutting, recutting and shading too.
__________________
__________________________________ Steve Lindsay AirGraver.com EngravingArtist.com |
#21
|
|||
|
|||
Re: Videos ~ 11 hours
Darn, I was hoping for happy little trees, bubbling brooks, and maybe an afro haircut (Bob Ross was my childhood hero, along with the guy in the cape on my underpants, hehe).
|
#22
|
||||
|
||||
Re: Videos ~ 11 hours
Thanks Steve, This is what a beginner needs, like Carl said we will watch them over and over again.
What I noticed and what's wondering me, I don't see you re-grip your vise with making a long spiral engravingline. It go's smooth in one move, what's your secret about that. Willem |
#23
|
||||
|
||||
Re: Videos ~ 11 hours
I don't know if it's how Steve does it, but I took a class from Lee Griffithsand he'll start with his fingertips on the ball and end up with it in the crook of his elbow - maybe higher.
He starts off turning it normally but if he runs out of 'hand' he just lets go and uses his forearm to keep it turning. |
#24
|
||||
|
||||
Re: Videos ~ 11 hours
Quote:
__________________
__________________________________ Steve Lindsay AirGraver.com EngravingArtist.com |
#25
|
|||
|
|||
Re: Videos ~ 11 hours worth
i have been watching your 11-hr vids there great. do u have any vids or info on how to apply the gold? and do u have info on teaching the bulino engraving method that u did on that shotgun on your guns page? thanks tsp.
|
#26
|
||||
|
||||
Re: Videos ~ 11 hours worth
You can see here
http://www.engravingforum.com/showthread.php?t=3134
__________________
http://rbaptiste.com |
#27
|
|||
|
|||
Re: Videos ~ 11 hours worth
thanks roland, that was just what i was looking for, tsp
|
#28
|
||||
|
||||
Re: Videos ~ 11 hours worth
Perfect ;-)
__________________
http://rbaptiste.com |
#29
|
||||
|
||||
Re: Videos ~ 11 hours worth
Hi, all. John Murray here. Currently living just outside of Milton, DE and am gathering as much info as I can from this excellent site so I can try my hand at a little bit of scratching. I have been doing etching on copper for a long time, and mezzotint as well. (Thats where my login name for this site comes from.) Had the pleasure of meeting Ken Hurst a few years back in Kitty Hawk, NC and remain impressed with his exceptional skill and remarkable kindness. So, now I want to try engraving on a simple, manual push level. Just about ready to order a push handle and some steel and unique sharpening guide with stone.
Honored to be here among so many talented and gifted folks. I'm going to continue reading and watching these infromative videos tonight and until my order gets here. I need all the help I can get, and am really grateful for any and all suggestions. My best to all- John aka (mezzotint) |
#30
|
|||
|
|||
Re: Videos ~ 11 hours worth
Hi I'm new to both this forum and engraving. I'm in the polite term a 'mature' student, which as far as I can see means I missed out on all the excitement first time round. I'm interested in engraving but also progressing to inlay and damascene work as used in historical metalworking. I just can't believe how many useful tips/videos etc are crammed on the site - so many thanks to everyone
|
#31
|
||||
|
||||
Re: Videos ~ 11 hours worth
Quote:
__________________
__________________________________ Steve Lindsay AirGraver.com EngravingArtist.com |
#32
|
|||
|
|||
Re: Videos ~ 11 hours worth
Hi Steve,
Very nice videos. I'm interested in how you did the signing. What tool did you use, & what is the height of the letters? I tried searching, but couldn't find the answer. Added after more searching: I found it. I don't know how to refer to the actual post/thread, but here's the answer. "For signing, sometimes I'll cut the letters and other times like in this case since it was a small border to sign on I'll just poke dots with a scribe. The scribe is made from a 1/16" rotary carbide bur sharpened into a point and held in a pin vise. In the video, I am first laying out the letters by lightly scratching them on and then I go back over it and place dots. There is a picture of of the carbide scribe over in the recent bulino thread but it is in a brass tube in the picture." http://www.handengravingforum.com/showthread.php?t=2484 Thanks,
__________________
Bill Last edited by bildio; 12-26-2010 at 01:13 PM. Reason: Found answer by more searching. |
#33
|
|||
|
|||
Re: Videos ~ 11 hours worth
This my first post on this site. we need more teaching videos on here. Maybe some about lay or gun prep and engraving.
|
#34
|
||||
|
||||
Re: Videos ~ 11 hours worth
Welcome Robert, There are a lot of videos, tutorials and book links at here: www.engravinglessons.com Scroll down towards the bottom of this page link: http://www.engravinglessons.com/Hand...0Resources.htm
__________________
__________________________________ Steve Lindsay AirGraver.com EngravingArtist.com |
#35
|
|||
|
|||
Re: Videos ~ 11 hours worth
What a wonderful resource -
|
#36
|
||||
|
||||
Re: Videos ~ 11 hours worth
Steve,
When doing these videos which Template(s) did you use for the graver? And which is the best Template to begin learning with? Donny |
#37
|
||||
|
||||
Re: Videos ~ 11 hours worth
Hi Donny, Used the clear 116 degree Universal template. Here is another tutorial with the basic cuts. Once you have those down, then it is just a matter of using combinations of these cuts to make the various leaves.
__________________
__________________________________ Steve Lindsay AirGraver.com EngravingArtist.com |
#38
|
||||
|
||||
Re: Videos ~ 11 hours worth
Thank you. Gonna rain here this weekend so I have ME TIME to practice!!
Donny |
#39
|
|||
|
|||
Re: Videos ~ 11 hours
Steve,
Just found and am browsing your site. Did you ever find the inlaying videos? I'd be interested in seeing the technique you use. I'm only a newbie, but it's on my list of things to try. For the larger areas that were gold inlay, are they only held in place by undercutting the edges, or do you crosshatch the inlay underlayment with a raised burr to help hold the gold, which is what I believe Meeks suggests? Your videos are a great example of the process, and like everyone else here, I'd like to thank you for putting them up. Is there a picture somewhere of your overall engraving workspace? Looks like you work under a 'scope a lot. Or is that just when you're making the videos? Jim |
#40
|
||||
|
||||
Re: Videos ~ 11 hours worth
Very well laid out thread and videos, some late night viewing in my Tabletpc..
Thank you.
__________________
Most human beings only think they want freedom. In truth they yearn for the bondage of social order, rigid laws, materialism, the only freedom man really wants, is the freedom to become comfortable. - (Sons of Anarchy) |
#41
|
|||||
|
|||||
Re: Videos ~ 11 hours
Quote:
Quote:
Quote:
Quote:
Quote:
__________________
__________________________________ Steve Lindsay AirGraver.com EngravingArtist.com |
#42
|
||||
|
||||
Re: Videos ~ 11 hours
HA!! Now I see where You Get all the Time to Do What You Do, You Take Catnaps on that Comfy Couch Between Jobs Hey.!! LOL
__________________
ChrisBooysen www.cbknives.com "If you are patient in one Moment of Anger, You will Escape a hundred Days of Sorrow." |
#43
|
||||
|
||||
Re: Videos ~ 11 hours worth
Yo Steve, what kind of engraving room is that? No clutter? No piles of books and pictures? And a couch???
You know what they say in a machine shop...."If there aren't any chips on the floor no one is working." ;~)
__________________
TOLERANCE is the virtue of a man without convictions. |
#44
|
|||
|
|||
Re: Videos ~ 11 hours worth
Hi,
That is a Masters work bench with a rug ,you wont find any clutter or metal filings on the floor. Steve has a special robot that auto cleans and rearranges everything in the whole workshop every two hours ! Only I know about it SE
__________________
Learn from those who know more than you do and teach those who know less than you do. - I.M. |
#45
|
||||
|
||||
Re: Videos ~ 11 hours worth
Here is the answer guy´s.....
http://www.youtube.com/watch?v=WZuVZARfvv0 |
#46
|
|||
|
|||
Re: Videos ~ 11 hours worth
Is this on a sticky post?
It should be. Actually, it should be in every library in the civilized world. |
#47
|
|||
|
|||
Re: Videos ~ 11 hours worth
Quote:
I will second that anytime anywhere Jim. SE
__________________
Learn from those who know more than you do and teach those who know less than you do. - I.M. |
#48
|
|||
|
|||
Re: Videos ~ 11 hours worth
Been watching these while on the treadmill. Thanks for organizing them on the forum. I had to fish for consecutive videos on YouTube
|
#49
|
||||
|
||||
Re: Videos ~ 11 hours worth
Thanks guys.. Glad these videos are being helpful.
__________________
__________________________________ Steve Lindsay AirGraver.com EngravingArtist.com |
#50
|
||||
|
||||
Re: Videos ~ 11 hours worth
I'll remember when I eagerly absorbed all the information. Thanks Steve.
|
Bookmarks |
|
|