|
The Internet's Largest and Fastest Growing Engraving Community
Discuss hand engraving using basic to the most advanced methods and equipment
Forum Members: 14,762. Welcome to our newest member, Katherine
EngravingForum.com -
Domain since Feb 7, 2003
Graver Video Conferencing is empty Join now!
|
|||||||
| ENGRAVING TOOLS - Paypal accepted | Classes | Glossary | Feedback | Tips | Sharpening | Bulino | Videos | Forum Policies |
 |
|
|
Thread Tools |
|
#1
03-09-2008, 04:53 PM
|
||||
|
||||
Hello to All!
My name is Jim Slaughter. I live in the San Francisco Bay Area and this is my first post on the forum. I've been snooping around for a few weeks. I've ordered a PC setup and Steve tells me it's in the mail, so next week begins the rest of my life. I'm hoping to keep an open mind about where I go with engraving. I've had a couple lessons from a local engraver that have whetted my appetite. He uses the "other" equipment but immediately suggested I go the Lindsay direction. I've been metalsmithing for about 20 years and doing chasing and repousse on my lamps, etc., for three years now. I have a studio in a plating and silversmithing shop, so have the opportunity to study a lot of engraved work that comes through. Recently I've been doing some framed sterling bugs. Here's a sample. I can already see where this could be improved with some decent engraving! Regards, Jim
|
|
#2
03-09-2008, 11:58 PM
|
|||
|
|||
|
Re: Hello to All!
Hi Jim,
What guage did you hammer & punch that piece out of? I've got one of those jobs coming up, but out of 980 silver to match a Spratling piece that belongs to a collector/dealer. You are not all that far from me... welcome to stop by if you're ever over this way. Brian Marshall instructor@jewelryartschool.com 209-477-0550
|
|
#3
03-10-2008, 09:00 AM
|
||||
|
||||
|
Re: Hello to All!
Brian, This piece is made with 20 gauge sterling, although recently I've moved to using 22 gauge. I've also moved to using argentium sterling silver (92.5% silver, 6.5% copper, 1% germanium) which is even easier to work and doesn't firescale or ever tarnish.
 It is still 925 although I think a 980is also available. I'll definitely be making it over to Stockton to meet you. Maybe I'll squeeze some learning into a visit as it looks like you have a lot happening there. Regards, Jim
|
|
#4
03-10-2008, 05:04 PM
|
||||
|
||||
|
Re: Hello to All!
Jim Welcome to the forum. great looking bug. Lately I have got the Repousse bug myself:smilie
 5: Check out the frog on the colorengraving thread > Dave
|
|
#5
03-10-2008, 05:50 PM
|
||||
|
||||
Re: Hello to All!
Dave, Thanks! I see the spider and the june bug (?) but not the frog. Where's the frog? Jim
|
|
#6
03-10-2008, 07:10 PM
|
||||
|
||||
|
Re: Hello to All!
Hi Jim
Next to last post in that thread, click the thumb nail photo
|
|
#7
03-10-2008, 07:59 PM
|
|||
|
|||
|
Re: Hello to All!
Welcome aboard Jim
 Ray
|
|
#8
03-10-2008, 10:29 PM
|
||||
|
||||
|
Re: Hello to All!
Dave, I found it. Very nice! A little frog with a little repousse and a nice background. Regards, Jim
|
|
#9
03-10-2008, 10:32 PM
|
||||
|
||||
|
Re: Hello to All!
Thanks for the welcome, Ray. I spent my first 18 years in Crystal City (the twin city to Festus, Mo., to those who don't know). Will get by the next time I'm around for a reunion. Jim
|
|
#10
03-10-2008, 11:36 PM
|
||||
|
||||
|
Re: Hello to All!
welcome Jim Slaughter nice to have you around.
sounds like we have lived in simalar areas of the usa i was living in Santa Rosa CA for 30 years then in FL few years then in Columbia MO for a year or so now back down to FL . nice to have you around and nice silver bug you got there!
|
|
#11
03-11-2008, 11:41 AM
|
||||
|
||||
|
Re: Hello to All!
Sounds like you've been coast-to-coast and a bit in the middle. I've been Missouri, Tennessee, Southern California and now Northern California the past 30 years. Maybe I'm just a step or two behind you.... Jim
|
|
| Bookmarks |
| Thread Tools | |
|
|
