![]() |
The Internet's Largest and Fastest Growing Engraving Community
Discuss hand engraving using basic to the most advanced methods and equipment
Forum Members: 14,761. Welcome to our newest member, Bruno
EngravingForum.com -
Domain since Feb 7, 2003
Graver Video Conferencing is empty Join now!
|
ENGRAVING TOOLS - Paypal accepted | Classes | Glossary | Feedback | Tips | Sharpening | Bulino | Videos | Forum Policies |
![]() |
|
Thread Tools |
#1
|
|||
|
|||
![]()
In Steves notes on the Dual regulatory set-up he says "Auxiliary output for rotary handpiece pedal or PalmControl can be adapted to regulator on the right.
" Does anybody have a photo of how they have done this? Cheers T |
#2
|
||||
|
||||
![]()
Hi Tom, Here is an older photo of the setup.
Unscrew the barb fitting where the clear line from the airgraver foot pedal connects and screw in a y fitting there. Them reconnect the clear line and also the line to the rotary disc pedal. I have those Y fittings and send them out with the disc foot pedals. The disc pedals are $69 and listed with the airgraver pedals http://www.airgraver.com/Hand_Engrav...OOT%20CONTROLS ![]()
__________________
__________________________________ Steve Lindsay AirGraver.com EngravingArtist.com |
#3
|
|||
|
|||
![]()
Order incoming. No hurry needed to send it.
|
#4
|
|||
|
|||
![]()
Is this still the way to do it? My regulator looks a bit different on the classic I just got. Their is only one gauge on mine.
Seth |
#5
|
||||
|
||||
![]()
Hi Seth, They were updated 7 or so years ago with some needed improvements. Check the inside front cover of the manual, there is a photo there. Compared to the older model there is the mode selection to shut idle on/off with a switch. Also a built in auxiliary port for a rotary or connecting a palmcontrol. There is also that optional switch to turn on/off the auxiliary.
__________________
__________________________________ Steve Lindsay AirGraver.com EngravingArtist.com |
![]() |
Bookmarks |
|
|