The Internet's Largest and Fastest Growing Engraving Community
Discuss hand engraving using basic to the most advanced methods and equipment
Forum Members: 14,762. Welcome to our newest member, Katherine
EngravingForum.com -
Domain since Feb 7, 2003
Graver Video Conferencing is empty Join now!
|
ENGRAVING TOOLS - Paypal accepted | Classes | Glossary | Feedback | Tips | Sharpening | Bulino | Videos | Forum Policies |
|
Thread Tools |
#1
|
||||
|
||||
New Roland Baptiste template for inlay
This is the different steps to sharp this point.
For the first template (little) I use the 100grip diamond stone For the second template I use the 600 diamond stone but you can finished with diamond polish for more slip. Thank you Steve, the template work very well and with the step's numbers is very easy and clear. For using you can see here http://www.engravingforum.com/showthread.php?t=2312 or here http://www.engravingforum.com/showthread.php?t=2234
__________________
http://rbaptiste.com |
#2
|
||||
|
||||
Re: New Roland Baptiste template for inlay
Roland that's a great idea with the numbers...
Maybe Steve or someone will post the numbers for the other templates... The small template should be used first and the face and heel template be used last... that way you only change the graver holding unit once... Jerry |
#3
|
||||
|
||||
Re: New Roland Baptiste template for inlay
Quote:
Here is a link to instructions for the clear universal template. Use the small template first for this one too. http://www.engravingschool.com/priva...0Sharpener.htm
__________________
__________________________________ Steve Lindsay AirGraver.com EngravingArtist.com |
#4
|
|||
|
|||
Re: New Roland Baptiste template for inlay
Roland I used it for the first time yesterday using copper into steel and really love the design of the fixture,good job!
|
#5
|
||||
|
||||
Re: New Roland Baptiste template for inlay
Hi Mcharon thanks foor your comment.
I hope see your job soon
__________________
http://rbaptiste.com |
#6
|
|||
|
|||
Re: New Roland Baptiste template for inlay
Hello Roland,
I rekon on all the different templates one uses the small template first then the one for the heel and backs,but numbering the other templates as mentioned earlier is a good idea.I have a flat/knife combo and dont know where to start on the small template? Can somone advise.Maybe number all the templates/sketches and post them on the forum and we can print the sketches from the forum web site,for those who would have got templates before them being numbered. Mo |
#7
|
||||
|
||||
Re: New Roland Baptiste template for inlay
Maybe this help you
For the flat template, if you want make a knife you don't do the 4 and 5
__________________
http://rbaptiste.com |
#8
|
|||
|
|||
Re: New Roland Baptiste template for inlay
Good Morning Roland Baptiste,
Tres bien,excllent you have solved my problem,I wll try and print this. Gracia Mohd:whoo: |
#9
|
||||
|
||||
Re: New Roland Baptiste template for inlay
Perfect... I hope it'll be interesting for a lot people
__________________
http://rbaptiste.com |
#10
|
||||
|
||||
Re: New Roland Baptiste template for inlay
Mohd
The key thing I learned on the first flat I did was that I was looking at it upside down. :doh: It's a very slight wedge with the wider bit to the top. Life goes better when you know that. Just recently I made a flat to match some wire and it was a snap - I just kept working the sides evenly until the tip fit my wire gauge the way I wanted it to. When I did the inlay it fit extremely well. |
#11
|
||||
|
||||
Re: New Roland Baptiste template for inlay
Roland That should help allot of us...
Thanks Jerry |
#12
|
||||
|
||||
Re: New Roland Baptiste template for inlay
I make a little video to use it but sorry for the bad quality.
http://www.youtube.com/watch?v=OyRYD9OjUUU Steps: 1 you cut your line 2 you pass with my point in the two sens into the line. you must have a inclination of your tool, +- 35 to 45° angle 3 you put the gold wire 4 you polish I hope it will be easier for you
__________________
http://rbaptiste.com |
#13
|
||||
|
||||
Re: New Roland Baptiste template for inlay
Super Roland. This will help people. Thank you. Here it is embeded in the forum
https://www.youtube.com/v/OyRYD9OjUUU&hl
__________________
__________________________________ Steve Lindsay AirGraver.com EngravingArtist.com |
#14
|
|||
|
|||
Re: New Roland Baptiste template for inlay
Good Morning Roland,
The video on the inlay was informative,I find just by looking I can learn more in a short time,than by reading.Ofcourse doing it and getting it right is something else.But thanks a lot for sharing it with us. Mo. |
Bookmarks |
|
|