Burl Handled Bulino Push Gravers - Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community

Steve Lindsay · #1 01-24-2013, 03:48 PM

Here is a photo of the new burl handled push gravers. There are two left out of these seven for sale. If there is enough interest more will be made. They are $199 each plus shipping. If you'd like one of the two left please chime in this thread saying so. The first two people saying they'd like to purchase one of the two is who they should go to.

PS.. these are non-powered manual push gravers.
And thank you again Mike Anders! Versions started over a year ago with Mike.

KDavid · #2 01-24-2013, 04:36 PM

I want the better one not the crappy one

mrthe · #3 01-24-2013, 04:37 PM

I love it Steve!!!
This bulino handles are Fantastics!!!
Congratulations, like ever a great tool!

mrthe · #4 01-24-2013, 04:51 PM

Steve ..... like for the Palm control.... are you thinking too in a Stainless and a Damascus version too?

Steve Lindsay · #5 01-24-2013, 04:54 PM

Thank Mrthe! Mrthe is the reason there are only two left. There were three!

Thank you again Paolo!

Quote:

Originally Posted by KDavid

I want the better one not the crappy one

David called while he was posting. He is taking one. Okay David - I'll try not to send you a crappy one!

There is one left now.

Steve Lindsay · #6 01-24-2013, 04:56 PM

Mrthe, Yes, I was thinking that too but depending on the interest in these.

Roger Bleile · #7 01-24-2013, 07:42 PM

Steve,

Are the handles flat on one side like a PC handle?

Roger

Steve Lindsay · #8 01-24-2013, 08:07 PM

Hi Roger, Yes, there is a good sized flat on the bottom.

Mike Anders · #9 01-25-2013, 12:07 AM

Super!!! Nice!!!

SEngraver · #10 01-25-2013, 12:59 AM

Hi Steve L,

Beautiful push graver handles,a great addition to the tools page.
Congratulations Steve.
SE

akintagleocarving · #11 01-25-2013, 01:42 AM

Hi Steve If you have one left can I have the last one please. AKhttp://www.engravingforum.com/images/smilies/top%20smiles/thumb[1].gif

rbaptiste · #12 01-25-2013, 02:11 AM

Very elegant. One for me please.

Steve Lindsay · #13 01-25-2013, 11:45 AM

Hi Roland, Thanks for liking them. There will be more in the works and I'll be sure to save one for you!

The first two to post in the thread for them were David and akintaglecarving.
Thank you SE, Mike and everyone for the nice comments!

bram ramon · #14 01-25-2013, 12:57 PM

Woooow Steve! These handels are almost to beautiful to engrave with!

Steve Lindsay · #15 01-25-2013, 03:20 PM

Thanks Bram! Yes, only drive these on Sunday with a dinner suit on!

pedroito · #16 01-25-2013, 03:38 PM

Gorgeous as all your tools Steve, congratulations on your work.

Pedro

Steve Lindsay · #17 01-25-2013, 07:29 PM

Thank you Pedro!

SEngraver · #18 01-26-2013, 12:42 AM

Quote:

Originally Posted by Steve Lindsay

Thanks Bram! Yes, only drive these on Sunday with a dinner suit on!

Hi,

Nobody seems to be listening - YOU ONLY DRIVE THESE ON SUNDAYS WITH A DINNER SUIT ON...... IS THAT CLEAR !!

SE

Alan Brown · #19 01-26-2013, 02:33 PM

Very professional. Please include me in your next batch, I'll
order one.

SEngraver · #20 01-26-2013, 10:46 PM

Quote:

Originally Posted by Alan Brown

Very professional. Please include me in your next batch, I'll
order one.

HI,
Welcome to The Engraving Forum Alan, just a bit of humour

It is nice to have you on the Forum.
SE

Superior Design · #21 01-27-2013, 04:13 AM

These tools are beautiful, the kind a great craftsman should have.

Cookie · #22 01-27-2013, 04:49 AM

Steve ,
Nice job! Allan Brown was one of my high school shop teachers. When we got the nod from Mr. Brown we knew we had a good project . I will go borrow his' for old time sake , ha ha. By the way that was over 40 years ago. Best Regards , Cookie

KDavid · #23 02-01-2013, 03:51 AM

got my Bulino Graver yesterday,,,it's Beautiful.....haven't figured out where to hook up the air hose though...

!!!

SEngraver · #24 02-01-2013, 04:44 AM

Quote:

Originally Posted by KDavid

got my Bulino Graver yesterday,,,it's Beautiful.....haven't figured out where to hook up the air hose though...

!!!

Hi KDavid,

I would advise you not to try to hook it to the air hose and supply but just use by palm push technique for now

SE

Steve Lindsay · #25 06-04-2013, 09:27 PM

Here is another batch of the manual burl push gravers. These are only produced periodically and that is why they haven't been added to the AirGraver.com shop site. I promised Roland Baptiste first pick from this batch. After he selects one, the remaining are available.

SEngraver · #26 06-05-2013, 01:53 AM

Hi Steve,

Very, very beautiful indeed for the moment I can only look at them,as I just got an air tool just a little while ago.Next time maybe.
SE

Superior Design · #27 06-05-2013, 06:05 AM

The Handles are beautiful. I just wanted to know what is Burl and why is he so expensive.

SEngraver · #28 06-05-2013, 10:12 AM

Quote:

Originally Posted by Superior Design

The Handles are beautiful. I just wanted to know what is Burl and why is he so expensive.

Hi Omri,

Burl wood is the wood the handles are made from ,as in the picture.It is an expensive wood.

SE

mrthe · #29 06-05-2013, 10:26 AM

Wow Steve! are so beautiful to see them all togheter that so makes me want to buy another one!
Omri this type of wood us muy expensive and i have to say that this tool is a little jewel when you have it in your hand.

Alan Brown · #30 06-05-2013, 11:25 PM

Steve, I will buy one of your burl push engravers. I will call you.
Alan Brown

Steve Lindsay · #31 06-06-2013, 12:03 AM

Hi Alan, Let me know which one you'd like and I'll send a paypal request to your email.

The gravers already spoken for and not available are (counting left to right)
first row #1 and #4
second row #8 and #9.

ali · #32 07-16-2013, 06:48 PM

Hello Steve, your burl push engravers are still available are? I want to buy one.

Santo · #33 08-25-2013, 10:24 PM

Steve, what will you get for these??

Steve Lindsay · #34 08-25-2013, 11:00 PM

Hi Santo, They are $199.

JamesE · #35 08-26-2013, 10:09 PM

Hello Steve, sorry if this is beginner info I should know already, but I was wondering if the different shape on this push graver is what makes it more suitable for bulino than the other push graver you sell. I'm still gathering info on all this engraving stuff while I save up to buy some tools from you.

I should be placing an order in the next couple of weeks and will be starting with the basics. I'm also wondering if this is a tool I should have, or should I just stick with the H&C and push graver from your store for now. Would it even make a difference for a beginner?

It really is a beautiful tool! Also, is there a burl handle for the other push graver?

Cheers,

James

Steve Lindsay · #36 08-28-2013, 01:42 PM

Hi James, These burl handles have a little more cut off on the flat portion than the black santoprene handled version you have. Which means it can be held a little flatter if desired. So there isn't a lot a difference in function. These are just prettier with the burl.

JamesE · #37 08-28-2013, 03:34 PM

Ah thanks for clarifying sir! The student in me tells me I don't deserve such a tool yet, but the lover of well made things says "go for it"! =]
If you have any left, I think I would like one!

Steve Lindsay · #38 08-28-2013, 05:58 PM

Hi James, There are four available:
first row #5 and #6
second row #7 and #12.

JamesE · #39 08-28-2013, 06:09 PM

Hi Steve! 5 looks good to me, thanks!

Steve Lindsay · #40 08-28-2013, 06:41 PM

Okay awesome #5! Paypal work for you? To your address Fedex 2nd day $16, or Priority mail $6.50?

JamesE · #41 08-28-2013, 06:45 PM

Paypal is fine, I'll set it up when I get home from work tonight.
As for delivery... would it be ok if you held on to it for me for a couple of weeks? I'll be making a larger order for more manual engraving gear, gravers, sharpening stones, templates and a goliath vise then. I don't mind waiting for all of it to arrive together.