![]() |
The Internet's Largest and Fastest Growing Engraving Community
Discuss hand engraving using basic to the most advanced methods and equipment
Forum Members: 14,760. Welcome to our newest member, SamWall
EngravingForum.com -
Domain since Feb 7, 2003
Graver Video Conferencing is empty Join now!
|
ENGRAVING TOOLS - Paypal accepted | Classes | Glossary | Feedback | Tips | Sharpening | Bulino | Videos | Forum Policies |
![]() |
|
Thread Tools |
#1
|
|||
|
|||
![]()
I am deciding on equipment and I don't want to purchase tools twice or learn how to engrave twice. I want to learn and grow with the equipment. Which would be better a foot pedal or palm air graver? Cost consideration is not a problem. Those who have used other engraving equipment in the past and now use a lindsay air graver, why do you prefer it?
|
#2
|
|||
|
|||
![]()
To answer the first question;
I prefer the palm control. Mainly because it is much more intuitive for me than trying to co-ordinate my hand, foot and eyes. Now I only need to work with Eye -Hand co-ordination. I also really love its portability. You can carry your entire engraving tool in your pocket and if you have an air or CO2 supply you can engraver ANYWHERE easily. Another advantage is that you can run the palm control off of CO2 tanks It cost about $3 to have a tank filled that you can work all day off of or $6 to have a tank filled you can work a week or two from. No need for a compressor. To answer the second question; I engraved for several years with a gravermax and did good work with it. But to do good work with it I had to work with the machine and tune it and add aftermarket parts to make it as smooth as I wanted it. Now with their new machines they have taken care of a lot of that by upgrading to the better parts so you don't have to do it. However, with those machines you still don't get as smooth a start (in my oppinion) as you do with the non-spring Lindsay design. Those machines still have a control box you have to find space for. They also have all the power cord and airhose speghetti to route and keep untangled. THe palm control has one hose. Another advantage is the power range. With the air graver you can get a very wide range of power by changing out the piston to a lighter or heavier piston. To get the same power range with the other machines you must buy at least the 901 and monarch handpieces. As I said, I have done very good work with both. But I find it much easier and more intuitive to do good work with the palm control airgraver than any other equipment I have tried (and I have tried them all:D ). Ray |
#3
|
||||
|
||||
![]()
If cost is not a consideration do both controls. Switching between the two is not a big issue and there are advantages to both.
http://www.handgravers.com/Intro.htm Having used the best others have to offer I believe it's safe to say there isnt any competition. But then there never really was. Airgravers were not designed to compete with the other manufacturers equipment but to take engraving to a higher level than was/is achievable by other tooling systems. http://www.handgravers.com/air-engraver-evolution.htm GRS makes good equipment no one can dispute that. As a beginner you will eventually end up buying pieces and parts from them as they have the lions share of the market in accessories which are quite necessary to the trade. But for simplicity of learning and turning out the highest quality work in the shortest time acquiring tools which allow you to spend time engraving rather than tinkering is paramount. There will be a learning curve in many areas as you no doubt know by reading the posts on this forum. Engraving is not hard once you put all the pieces together and the Lindsay family has a penchant for taking care of it's own. We do an extrordinary amount of work teaching GRS Ngraver and owners of other tools how to get satisfactory results from their equipment and improve their engraving skills. Unless you decide to opt for formal instruction to shortcut the time frame involved all the tricks of the trade are offered free of charge on the website or through the forum and it's members by whatever extent is possible on line. No one else offers as much. Some will say a tool is a tool and of course there will be strong opinions on either side of the line. I just happen to love my Classic because it allows me to engrave carve and create as fast or faster than I can think. One hand piece does it all. flawlessly. More questions just ask.
__________________
CoinCutter |
#4
|
|||
|
|||
![]()
Very nicely said..... I cant wait to see the new stuff Steve's got in the works.... I sure wish money wasnt an consideration...
![]() |
#5
|
|||
|
|||
![]()
Hi Susan
If money is not an issue then always buy the very best you can. The palm graver is the best there is. It will save you money in the long run. If you buy anything less you will end up trading your way to one of these If you click on the feedback at the top of the page and read all the endorsments and the names of those people, it gives you an indication of how good it is. Best wishes and good luck with your endeavours in the engraving world. Andrew Biggs |
#6
|
||||
|
||||
![]()
Susan
Dittos to all the other comments Palm Control Rules ![]() |
#7
|
||||
|
||||
![]()
I've used the "other" stuff so: There have been other "posts" that mentioned the "ease" of using Steve's equipment. This is his site however, but you still get an honest opinion. My personal suggestion is Steve's - and get the 3 pistons. You then can engrave from foil to cast iron (so to speak). If you have access to a compressor - then please rent Steve's first. Just put it in your hand, feel how it fits, put the tip down, and give it a gentle push. A harder push gives it a heavier cut. Nothing is better than trying it. If you need to actually buy a compressor and don't care about the noise - go to SEARS and get a small unit for $100 - $120, it will run for an hour before it will turn on and fill the tank (always hit the OFF switch when its full, and you are done for the day - or it will start at 2AM! to refill!!!). If you must have a silent system - then get the BIG co2 tank assy and buy 2 tanks - or bite a bigger bullet and get the Med size SILENTAIRE (with tank). You can use the extra capacity to blow off the work area (at LOW psi!!) - and there is no compressor "pulse").
There is nothing wrong with the GRS Engravers - the difference in cost is minor - but the difference in hold in your hand feel and the actual cutting is major. Yup - I'm a fan - it cost a bundle - and I don't regret it 1 second. (now, if he'd just sell a package of skill..........) |
#8
|
|||
|
|||
![]()
I have both tools, I like each for different reasons.
If I could only choose one tool I would pick the tool with the Palm Control Handle (PCH). The PCH has the advantage of being portable, and it doesn't require as much air. The additional advantage to using the PCH is you can engrave standing up, in some cases this is nessesary if you are working on a long piece. In fact it is the only tool that I know of that can be used standing up. One more thing that I noticed right away when I got the PCH was the tool cuts right away when you set it down on the metal and push lightly. With the foot controlled tool you don't engage the pedal right away as you put the graver to the surface, there is a second or two before you push down. Learning to use the foot pedal is no real problem, it's just like driving a car. Both tools are the best tools you can buy, you know you have a tool that will do the job when you buy one. Good luck |
#9
|
||||
|
||||
![]()
That adjustment screw in the Palmcontrol is a feature for the engraver who wants to set it for heavy handed engraving or for light handed engraving. The screw is preset to what I like to feel for resistance while engraving. In a way the tool and feature teach a person to feel the amount of resistance to use while engraving. Not everyone is the same though, therefore a heavy handed person can set it heavier if desired or it can be set lighter.
Steve |
#10
|
|||
|
|||
![]()
the lindsay guy has an unbeatable deal. you can try the tool i think it's for 30 or so days and return if you don't like it. i talked to steve, so far only 1 person ever sent one back! if you buy the foot control, it can always be upgraded later to a palm control. i used grs gravermeister for 30 years and was used to foot pedal. i bought the lindsay foot pedal model. i find it quite to my liking.
|
#11
|
|||
|
|||
![]() Quote:
I agree that the Classic is the best tool you can get. A Palm Control is always an addition to both the Classic and the Artisan. If cost is a issue Get a Artisan. Check out Chapi a new engraver that is engraving outstanding work after only a few months. Here is the link to his practice plates. http://www.handengravingforum.com/showthread.php?t=2549 It is a great deal at under $800.00 no one elses equitpment comes even close to the quality and perfomance at that price. Just check the the names of the engravers and responses in this tread. We All agree. ![]() AirAmp |
#12
|
||||
|
||||
![]()
I really like Chapi's artwork.
It's a fact that if you can draw it, you can engrave it. That's the secret behind any engraving tool. Of course, nothing beats the best tool on the market!! |
#13
|
|||
|
|||
![]()
Correct me if I am wrong....but with the Lindsay AirGravers, specifically the PalmControl, is all that is needed is an air source, regulator and connecting parts?
No more bulky equipment with all those buttons and knobs?? |
#14
|
||||
|
||||
![]()
You are Correct, Totally Portable and now electricity required, I love mine.
David
__________________
David Gruber WWW.Sharpgraver.com "The democracy will cease to exist when you take away from those who are willing to work and give to those who would not." Thomas Jefferson |
#15
|
||||
|
||||
![]() Quote:
![]() Nothing else. I have a litle 23liter/minute compressor so silent that you can't hear it over the radio and thats the only thng that needs electrics. if i use my co2 cylinder I can engrave enywhere. Only things you need to know is stroke length, air pressure and the idle adjust. I love the palm control for most work but sometimes prefere the foot control but because I lend it out a lot have to do everything with the PC and that also works very well. The foot control I use most for stippling, hammering and pushing beads over stone's. For engraving I would not use it that much. Having a gravemax at work I still bring my Lindsay to work every time ![]() Simple choice for me ![]() |
#16
|
|||
|
|||
![]()
Susan J
I purchased a complete GRS system, GraverMax with four different Graver handles long before I ever heard of Steve Lindsay. Now I use Steve's PalmControl that does it all, it is simple to adjust for light to heavy cuts then if you need extra heavy cuts you can change the piston (I have never changed mine). Save yourself a lot of time and grief and buy the PalmControl (You will sooner or later anyway). Best Wishes Ken |
#17
|
|||
|
|||
![]() Quote:
Ken, You are correct in saying you'll buy one sooner or later....in my case, it is later.....where were you 5 years ago?? [L O Lin a sad kind of way]. I ordered mine yesterday...now its kinda like waiting for Christmas. Do you find that all gravers will fit? Like the new ones from "the other" guys". |
#18
|
|||
|
|||
![]()
I am from Denmark so please excuse me if my question is weird. How much equipment do I need to start engraving with air? I have a normal compressor. Today I have ordered a set of sharpner systems, and extra graver steel.
|
#19
|
||||
|
||||
![]()
Hi Carsten, For an expensive way to give it a try without air check the thread: http://www.engravingforum.com/showthread.php?t=4
Here are prices of the AirGravers Artisan AirGraver handpiece with foot control idle adjust with dual regulators: $844 http://www.airgraver.com/Artisan-AirGraver.htm Classic AirGraver handpiece with foot control, idle adjust with dual regulators $1244 http://www.handgravers.com/Classic.htm or Classic AirGraver Handpiece with PalmControl $2690 http://www.handgravers.com/PalmControl.htm The difference between the Classic and Artisan is the stroke collar. The stroke collar on the Classic provides the power of several sized handpieces in one. It is similar to setting the back swing of a hammer hitting a punch. It can be set at a short back swing or longer one. The PSI flow through the foot pedal or PalmControl controls the power and speed within a given stroke length setting. Think of it similar to gears in a car. Set it in first gear (short stroke) and you have good low end delicate control... or set it in fifth gear and you can cut much deeper than in first gear. We can still cut delicate lines in fifth gear but it is easier to cut delicate lines in first gear. If thinking about this analogy with a car, then the Artisan is fixed in 3rd gear.
__________________
__________________________________ Steve Lindsay AirGraver.com EngravingArtist.com |
#20
|
|||
|
|||
![]()
Having seen the excellent work produced by Carl Bleile using the Artisan can anyone show other work on steel produced with a "basic" Artisan set up.I am in the process of ordering an Airgraver and quite frankly at present money is an issue.( all the kids I have to keep!) PBD.
|
#21
|
||||
|
||||
![]() Quote:
Damascening an Elk with an Artisan http://www.engravingforum.com/showthread.php?t=972 Another thread that might be helpful is this one: Artisan vs. Classic http://www.engravingforum.com/showthread.php?t=1303
__________________
__________________________________ Steve Lindsay AirGraver.com EngravingArtist.com |
![]() |
Bookmarks |
|
|